Roof Gutter Issues

Repair and installation of Roof Gutters

Roof Gutter Maintenance and Repair in Townsville

The most common problems with rain gutters are leaking, overflowing, sagging, and pooling runoff. You mustn't leave these issues unattended. If you wait too long to get them done, it would be too costly to repair and might need to replace them in the end. Remember that any of these conditions can result in severe water damage on the foundation and around the house.

Signs Of Roof Gutter Problem

Your homes need a sold and leak-free roof and gutters. It can assure you that your home has enough protection against the elements. But what if you see visible issues? Fortunately, it is not easy to find Roof Gutter Repair services. But how will you know that you need help fixing the roof gutter? Here are some crucial hints of gutter issues to take note of

  • Fading Paint. Gutter paints can withstand wear and tear. But when you notice that the gutter paints are fading, that this is evidence that you need to get it repainted. However, be aware that the surface will not look like the original. So if this will bother you, have it replaced instead. If you plan to repaint it, do not wait long to get it done since replacing the gutter system can be too expensive.
  • Gutter Seams Are Not Balanced. The sections of your roof gutter connect to the gutter seams. That is why these must be together. Enough sealant can prevent water from seeping in. Some seams are repairable, but many repairers believe that it is not a cost-effective idea to keep on repairing old gutter seams.
  • Presence of Mildew On Home Foundation. If you see any mildew or pool of water, that should tell you that something is not right. The reason why the downspout should be a couple of feet away from the foundation is to avoid water damage. When moisture builds up, it will seep through the foundation then to the basement. And this is when you will start to smell a mildew growth. So as soon as you notice a pool of water near the foundations of your home, you might want to consider replacing your gutter and downspouts soon.
  • Sagging Gutters. During your regular roof and gutter maintenance, it is vital that you also check the fasteners. They hold the gutters on the edge of the roof, and they too need to be maintained. If you notice that you have frequently been securing the fasteners, it could mean that the gutters are clogged. When it's already sagging, you would need to replace them right away.
  • Visible Decay and Separation. Some homeowners do not mind the separations or decay of the gutters. They think that this is not a big deal. However, this sign is as useful as the other things that you consider. You can fix the separation by using a sealant. But when the separation becomes more apparent, you have to prepare to have it replaced soon.

Simple Roof Gutter Repair

Yes, there are gutter repair services that you can call to get them fixed. So before you call for help, there are the things that you can do. It will save you from spending on a repair that would have been easy to do. So here are some DIY repairs for your roof gutter:

Gutter Leaks

When your rain gutters start to leak, it can be due to a problem on the section joints. If there is standing water in the gutters, it will rust the galvanized steel seams. Worse, it can seam through the seams even in aluminum gutters. So how can you try to fix your rain gutters?

How To Fix It:

  • Check for any signs of sagging or standing water.
  • Add or adjust existing gutter hangers.
  • The inside of the gutters should be dry.
  • Clean the leaking seams by brushing.
  • Apply caulking compound in and out to seal the leaks.
  • Use roofing cement to patch the holes.
  • Embed the sheet metal patch on cement.
  • Apply a second coat of cement over the patch.

Overflowing Gutters

If your gutters overflow during heavy rainfall, it can damage your walls and its foundation in the long run. The cause of overflowing can be a clog in the gutters or on the downspouts. It can also be due to the sagging of the gutters, or they are not large enough to handle this much volume of rain.

How To Fix It:

  • Clean the gutters and remove any debris that creates a clog.
  • Install gutter guards to prevent debris buildup.
  • Replace gutters if they overflow, and there's no sagging, or it's not clogged.

Downspout is Clogged

There is a possibility that the downspout will break lose between the sections or from the gutter outlet. And this will happen if the section elbows are clogged with debris. For this issue, you can try to fix it on your own. Here's how to do it.

How To Fix It:

  • Take each section apart and clean thoroughly.
  • Refasten then by pushing the elbows and sections together using two pieces of ⅜ inch #8 galvanized sheet metal screw.
  • Anchor the straps to secure the downspouts to the wall.

Sagging Gutters

Sagging can happen if the gutters are full of rainwater. Gutters are usually made of flexible materials like vinyl, aluminum, or galvanized steel, and they can sag when it's extremely heavy with water. When they start to sag, they would not be able to drain rainwater efficiently. And this can make them sag even more.

How To Fix It:

  • You might need to reseat or replace the hangers. For spike-and-ferrule hooks, make sure you drive the spikes into the solid wood using a hammer. If it will not hold, replace it with a longer nail or screw. If you are using a clip-style hanger, you need to tighten it by lifting the roofing and refasten the hangers.

Knowing when you need to call for help with the Roof Gutter Repair is extremely important. But of course, you can only decide to get in touch with a professional roof repairer if you know that you cannot fix the problem on your own. So review the simple solutions for common gutter problems listed above and determine if you can do it on your own or not.

We're on call 24/7 for all of your plumbing emergencies